Mesh Networking Relay

Mesh Networking Relay at a Glance...

  • 16 Relays Installed on a Circuit Board
      - Highly Reliable with Industry Leading Command Set
  • Onboard Digi Series 2 Interface
      - Mesh Networking Module
      - Integrates in Existing Mesh Network
  • ProXR Versions
      - Industry Leading Command Set
      - Expandable to 256 Relays
  • Industry Leading Command Set
      - Send Specific Commands to Trigger Relays
      - Trigger Any or All Relays
      - Program in Almost any Language
      - Read 0 to 5 Volt Sensors

Selecting The ZB ZigBee Interface

By selecting the ZB Mesh interface you will be sending commands over an existing Mesh Network.  We don't recommend first time users learning Mesh Networking with these devices.  Users should have an understanding of Mesh Networking, we will not be able to provide Mesh Networking support.

Selecting a Mesh Networking Relay

Below you will find the 16-channel Mesh Networking Relays that are available.  The difference being the amperage of the relays installed and the type of relay.  Choose the controller that fits the amperage you are switching.  You will find SPDT relays in the 5, 10 and 20 amp versions and an SPST version in 30 amp.  DPDT versions are also available with 1, 3 or 5 amp relays installed.  For more information on selecting the correct relay for your application see Choosing a Proper Amperage.

Selecting a Mesh Networking Relay Series

The 16-Channel Mesh Networking Relays are available in the ProXR versions.  The boards have firmware installed and accept the ProXR command set.  The ProXR Command Set is the industry leading command set for controlling relays.  All ProXR controllers are expandable to 256 relays.  When you find your controller click on the Full Description link to view full specs, watch setup videos, download software and purchase.