Bluetooth Time Delay Relay - 4 Channel

Trigger Relays with a Sensor or Button

sensor Relay

Wireless Reactor at a Glance...

  • 4 Relay Installed on a Circuit Board
  • 8 Analog Inputs Trigger Relays
  • Configure Board with Bluetooth Connection
      - 200' to 300' Bluetooth Range
  • Configuration options
      - 256 Different Trigger Points
      - 8 Background Timers Available
      - 4 Rotation Counters Available
      - Configure Activation Sequences
  • Base Station Software
     - Point & Click Interface
     - Use to Configure Board
     - Read Sensor Levels
     - Read Status of Relays
     - Manually Trigger Relays
Sensor Activated Relay
Time Delay Switch

The Reactor Relays are just that...a relay that reacts to a connected sensor or contact closure.  Use that sensor or contact closure to trigger the relay or start a time delay so the relay will turn off automatically.  Set a trigger point where a relay will trigger above or below that point.  Set a range where the relay remains energized as long as the sensor level is in that range.  Use a connected sensor or something as simple as a button to start a timer or sequence that you configure.  Setup, configuration and manual control is done with the included Base Station Software.

Wireless Reactor Options
Bluetooth Reactor Relays uses a Bluetooth interface that pairs with your Bluetooth computer connection.  Wireless access to the board when it may be located out of reach!  Making this the ideal choice for wirelessly accessing and controlling relays using a sensor or contact closure!

Wireless Delay Relay
802.15.4 Reactor Boards are Configured Wirelessly
Extremely Powerful, Very Reliable Sensor Relay!

Selecting The Bluetooth Interface

Wireles Delay RelayBy selecting the Bluetooth interface you will be uploading configurations through the wireless Bluetooth interface of your computer to the board.  Boards on this page are equipped with a ZBT communications module that adds Bluetooth communications to the board.  Configurations can be uploaded to the board through a wireless connection using the included Base Station Software.

Selecting a Bluetooth Time Delay Relay

Below you will find the 4-channel Bluetooth Reactor Relays that are available.  The difference being the amperage of the relays installed and the type of relay.  Choose the controller that fits the amperage you are switching.  You will find SPDT relays in the 5, 10 and 20 amp versions and an SPST version in 30 amp.  For more information on selecting the correct relay for your application see Choosing a Proper Amperage.

Easy Board Selection

Find the board you need by using the interactive menu to he right.  Hover over the Button and select the number of relays you want installed and then select the computer interface you need.  Once there simply select the board with the correct amperage for the item you are switching.