Wireless Time Schedule Relay - 8 Channel

Wireless Time Control

Wireless Time Schedule Relay

Wireless Time Schedule Relay...

  • 8 Relays Installed on Circuit Board
  • Control Relays based on Time Schedule
  • Accurate Machine-Manufactured Design
  • Onboard 802.15.4 Interface Module
      - Requires 802.15.4 Modem
      - Wireless Connection to the Board
  • Modem Mounts as a Virtual COM Port on Computer
  • Supports Daylight Savings Time
  • Sync Time with PC or Manually Set Time
  • Base Station Software
     - Point & Click Interface
     - Use to Configure Time Schedule
     - Manually Trigger Relays
Wireless Time Schedule Relays
Set Time Schedule to Trigger Relays

Wireless Time Activated Relays are equipped with firmware built into the board that will allow you to setup a time schedule to trigger relays.  The Time Relay series has an integrated Real Time Clock to control relays based on a time schedule (the board knows what day & time it is).  These relays use a 802.15.4 wireless modem connected to the USB port of your computer to communicate.  The modem supports any available COM port at any standard baud rate, allowing you to setup the time schedule & upload it to the board.  Once stored, the computer is no longer needed, the relays will activate according to your schedule.

Wireless Time Schedule Control
Events are scheduled times when a relay or group of relays are turned on or off.  They are defined by the user first by time: Year, Month, Day of Month, Day of week, Hour, Minute, and Second.  You have the ability of switching relays on or off at very specific times.  You can add up to 1000 Events to the list.

8-Channel Wireless Options
Wireless Time Schedule Relays are available with SPDT (single pole single throw) 5, 10 and 20 amp or SPST (single pole single throw) 30-amp relays installed.

Wireless Time Schedule Relay
These 8-Channel Wireless Time Schedule Relays can trigger
relays according to a time schedule!
Time Activated Relay You Can Count On!

Selecting The Wireless 802.15.4 Interface

USB Relay ZUSB ModuleBy selecting the 802.15.4 interface you will be sending commands through a modem connected to the USB port of your computer.  Boards on this page are equipped with a 802.15.4 communications module that adds wireless communications to the board.  Time configurations can be uploaded to the board through a wireless wireless connection using the included Base Station Software.

Selecting a Wireless Time Schedule Relay

Below you will find the 8-channel Wireless Time Schedule Relays that are available.  The difference being the amperage of the relays installed and the type of relay.  Choose the controller that fits the amperage you are switching.  You will find SPDT relays in the 5, 10 and 20 amp versions and an SPST version in 30 amp.  For more information on selecting the correct relay for your application see Choosing a Proper Amperage.

Easy Board Selection

Find the board you need by using the interactive menu to he right.  Hover over the Button and select the number of relays you want installed and then select the computer interface you need.  Once there simply select the board with the correct amperage for the item you are switching.