XSC Wireless Modems

Modems for XSC Long Range Wireless Relay Communication

Modems with part number ending in ZIGMO will feature our new case for modems with an external antenna and is wall mountable, smaller and features status lights so you'll know you're  connected. .

XSC Modems at a Glance

  • Mounts as a Virtual COM Port
  • Wireless Communications up to 15 Miles
  • Programmable Baud Rate
  • Plug In, Open the COM Port and Start Sending Commands
  • Compatible with All XSC Devices
  • LED Status Lights Indicate Communication
  • USB Powered
  • Includes USB Cable, 20' Antenna Cable
  • Includes Mountable Enclosure

XSC Wireless Modem

XSC Modem make Wireless Control EASY
Plug In, Open the COM Port and Start Sending Commands
15 Miles of Wireless Control From the USB Port on Your Computer!

Wireless Communication

Communicating with a Wireless Device does NOT have to be complicated.  Our line of XSC modems allow first time users to communicate with ANY XSC device on the site with a standard range of 2 miles and a long range on 15 miles with this Modem and outdoor antenna. 

Here's how it works

Plug the XSC Modem into your computer and install the drivers.  The XSC modem will mount as a COM port on your PC.  Next, talk to the COM port as though you were communicating with a RS-232 serial device that is directly connected to your PC.  That's all there is to it!!!

XSC Modems offer wireless 2-way communications, compatible with any XSC device.  This modem is Powered by the USB Port.  The XSC  Modems includes a 20' antenna cable, USB Cable and Enclosure.

XSC modules offer 100% emulation of a COM port and offer a completely transparent communication layer. We have chosen these communication methods because we believe they offer the best compatibility and quickest implementation time.

XSC Long Range Antenna

Long Range Antenna

An outside antenna will need to be installed in order to reach the 15 mile limit of these devices.  When you choose the UXSCMLR_ZIGMO Modem we will include everything you will need to install this except for the pole.  Included will be the Cushcraft PC9013 antenna, 20 feet of cable (longer cables are not recommended) and the connector to connect the board to the cable.  Purchase a pole to mount the antenna from your local home improvement store and install the antenna.  Connect the board to the antenna via the provided cable and start sending commands.

XSC Modems offer wireless 2-way communications, compatible with any XSC device or network.  This device is Powered by the USB Port.  Includes USB Cable and Enclosure.