ZigBee Relay

ZigBee Relay Board

ZigBee Relay Controllers offer Standardized Low-Cost, Wireless 2-Way Communications, Offering Excellent Communication Range and Reliability. ZigBee Relay Controllers allow you to speak to a NCD Device using standard Serial Communication as though the device were directly connected to the COM port of your computer. Serial commands are automatically forwarded to ZigBee devices within range.

    Summary of ZigBee Communications
  • A ZigBee Modem mounts as a Virtual COM Port on your PC
  • Simply write your software to talk to the serial port and you will be talking to a ZigBee Relay in no time!
  • Supports 2-way communications at any baud rate up to 115.2K
  • 8 Data Bits, 1 Stop Bit, No Parity
  • ProXR versions expandable to control up to 256 Relays using the XR Expansion Port
  • Control one relay or all 256 at once with manual or automatic refreshing command set
  • SPDT, SPST, DPDT and Reed Relay versions
  • 1, 3, 5, 10, 20, & 30 amp versions available
  • No special software needed
  • Low Cost wireless option
  • All ZigBee Controllers are SignalSwitch Compatible
Using our example software and source code there is little to no programming required.
Using our USB Modem the relay acts like it's connected directly to your computer!
4 Channel ZigBee Relay Board

Wireless Relay Applications

The ease of setup of the ZigBee Relays, which utilize a wireless protocol is demonstrated in the above video. These Wireless Relays are ideal for reliable, low cost wireless relay applications. Not only is it easy to power and connect the wireless interface but thanks to our example software and source code there is little to no programming required to allow your computer to begin communicating with the relay. Simply connect a ZigBee Modem into your USB port and it will forward all commands to the Wireless Relay. (Commands can also be sent to multiple Relays).

ZigBee Relay

Our ZigBee Relays feature a wide range of controllers to fit just about any application!   DPDT and SPDT controllers are available with your choice of eight channel 8/10-Bit Analog to Digital Conversion or UXP Expansion Port on selected models and all are of course SignalSwitch compatible.  Our recently introduced Low Cost line of relay controllers also feature a ZigBee controller.  Select ZigBee Relays feature the ProXR Command Set and an XR Expansion Port.  Built from the ground up with expansion in mind, simply Chain the XR Expansion Modules to the XR Expansion port, one after another, to meet your computer controlled switching requirements up to 256 relays.  A ZigBee Modem connects to the USB Port of your PC and mounts as a virtual COM port (a ZigBee Modem video can be found at the bottom of this page).  Simply write your software to talk to the serial port and you will be talking to wireless devices in no time!!!  For more detailed information and to order, please click on the links below.


New to ZigBee Wireless Relay? Click the following links for helpful wireless articles to get you started.
ZigBee Wireless Relaywith UXP Port
ZUXPSSR8xPROXR ZigBee Relay with UPS Port
A/D Conversion
ZigBee Analog to Digital Converter
UXP Expansion
UXP Expansion Port
XR Expansion
ProXR versions
USB Relay with Analog to Digital Conversion available on the 2 through 32 channel models USB Relay with UXP Expansion Port available on the 16, 24 & 32 channel models USB Relay with XR Expansion Port available on the 2 through 32 channel models
Onboard analog to digital conversion is available on selected models of these controllers! This will allow you to:
  • Read light and temperature levels
  • Easily activate relays when A/D limits are reached
  • Detect audio levels in a room when connected to a microphone
  • Read switches, potentiometers, and analog joysticks
  • applications are limitless, and surprisingly easy to integrate
  • Available on 2 - 32 channel ZigBee boards

UXP is a new standardized data port, specifically for the purpose of speaking to various expansion modules. If the controller you are considering is equipped with a UXP port, you can take advantage of extended commands to speak to our growing line of I/O expansion modules. UXP in the part number allows you to:

  • Add Contact Closure Inputs
  • Add Analog to Digital Inputs
  • Add Voltage Detectors
  • Digital Potentiometer Outputs
  • Available on 16, 24 & 32 channel ZigBee Boards

Models with the ProXR suffix will feature the ProXR commend set. The ProXR series will allow you to:

  • Send simple commands to activate relays
  • Upgrade without having to re-write your software
  • Activate up to 16 relay timers
  • Control up to 256 total relays using the XR expansion port
  • Full backward/forward compatibility w/the ProXR series command set
  • Available on the 2 - 32 channel ZigBee boards

NCD Component Library

Download NCD Component Library

By downloading the NCD Component Library you will receive over 40 samples from A/D Conversion to Duration and Pulse Timing and best of all it's FREE!! We want the user to be able to experiment with all the different samples available so as of right now the samples cannot be downloaded individually. 

We've "Started" the Programming for You

With the NCD Component Library we've "started" the programming for you.  We say started because these are fully functioning samples but we've also included the source code so you can customize them to your exact needs.  Start by downloading the NCDComponentSetup.zip file from the NCD Component page.
Download NCD Component Library 

Over 40 samples included with this download!  To view screen shots of each example visit our NCD Component Library Page.

Copyright © 2018 Relay Pros, LLC. | Ecommerce Shopping Cart Software by Miva, Inc.