Serial Communication Interface Module

RS-232 Serial Interface Module
Direct Wire Connection

Product Code: ZRS-A


ZRS-A
Wire It Up
ZRS-B
Plug It In
ZRS-AB
Both!
The ZRS Modules give reliable Serial Communication to any of our devices with a pluggable connector.
Simply pop out your old module if necessary and insert the new one and you're ready to start.
Choose which RS-232 version you need at checkout.

RS-232 Serial Interface Module
Direct Wire Connection

$34.00/ea
 

ZRS at a Glance

  • Three Options for Serial Connection:
    • Embedded DB9 connection
    • External DB9 Connection
    • 3-Wire Screw Terminal
  • Pluggable to fit any of our Surface Mount Board Interfaces
  • Reliable RS-232 Serial Communication
  • Supports Serial to USB Adapters
  • Resistant to Induction

Resources:

This Product:

ZRS-A
RS-232 Serial Interface Module
Direct Wire Connection
Stock#: ZRS-A $34.00
 

About the ZRS Modules

The ZRS RS-232 Serial Interface module adds a serial port to the NCD line of products.  Most existing NCD devices with a pluggable interface module may now be converted to a standard RS-232 serial interface simply by changing the communications module.  The ZRS is offered with 3 different RS-232 connection options depending on the wiring option that best suits your application.

Three RS-232 Connection Options

There are three RS-232 connection options available for this controller.


ZRS-A
Wire It Up
ZRS-B
Plug It In
ZRS-AB
Both!

Choose the connection that fits your needs. The ZRS-A connection is recommended for applications where hard wiring directly to the board is needed. ZRS-B has the fill 9-Pin RS-232 connector on the board. The ZRS-AB Has the fill 9-Pin connector but is is located off the board for applications where the board may be place inside an enclosure an the RS-232 connector needs to reach to the side of the enclosure.  You can choose one of these connection options at checkout.

Processing...

RS-232 Serial Interface Module<br/>Direct Wire Connection

Code: ZRS-A


$34.00

Product Details

RS-232 Serial Interface Module - Direct Wire

Attributes in <span class="bold">bold</span> are required.
-
+