Take Manual Control of Taralist
At any time, a computer may monitor the Taralist Controller with Base Station or any device with a browser to read the status of the relays or activate relays. This Web-i version will allow access to the board from anywhere on the network or internet. You can take over the Taralist or the Taralist can operate autonomously (without a computer).
Web-i controllers can be accessed remotely through an Internet connection using any device with an embedded web browser such as a smart phone, tablet, or computer. The Module has firmware built-in that will allow you to access the web pages and that will
send commands to the board.
Web Relay Modules
This board is equipped with a Web-i Module. The Module has custom firmware built-in that will allow you to access the built-in web pages. Those pages will allow you to send commands to the board such as simple on/off commands or complex timing commands. The Web-i communications module also adds an Ethernet interface to the board and will connect to a your router with a standard CAT-5 cable (a Wi-Fi adapter is available - see below). The Web-i module will be powered by the board which will require 12 volts of power that can be hard wired or you can purchase a "wall wart" type transformer at checkout. For more information view our Web-i Video.
Built-In Working Web Pages
The Web-i Module has built-in working web pages that will let you control the relays and read analog inputs. You can also set passwords, create macros and send ProXR Commands all through pages that are already there! These are working pages that are ready to go as soon as you establish communication to the board but it doesn't stop there. Using a simple ftp program and HTLM editor you can download and modify the pages to fit your needs or company look including adding your logo and company information.
LAN or Internet Control
Control relays from your local internet only when you are connected to your local area network or control from the internet from anywhere outside your network. Once your router is properly configured for port forwarding, users may access the web pages built into the Web-i interface from anywhere in the world just like it were a normal web site. Simply use the Web-i web pages to monitor and control your electronics or customize the pages for your own needs. Please Note: the time schedule MUST be uploaded using Base Station Software and a computer and cannot be uploaded using a browser.
Connectivity of Web Relays
Control these relays using the preferred web browser of your smart phone, tablet or computer. There are two main variations on communicating with the relays, Local Control and Global Control.
Local control is the easiest way to gain access to your Web Relays. Local Control means your mobile and the Web-i relay controller are both connected on the same network in a local area. For instance, you are at work and your phone and Web-i device are connected to your office network using the same office router (which support Wi-Fi for your phone and Ethernet for the Web Relay controller).
Simply enter the IP address of the Web-i device into the URL bar of your favorite browser. You will have instant access to the web pages built in to the Web-i controller. When connected in this way, you will only have access to the relay controllers as long as your computer or mobile device is in range of your local area network. Users outside the network will not be given access to the controller. Global Control gets around this limitation.
Global control means you can control a Web-i enabled relay controller from anywhere in the world. This means your Android can access this device anywhere internet access is available. Before you can communicate to a Web-i device globally, your router MUST be configured to forward port 2101 (complete instructions on how to forward port 2101, please visit www.PortForward.com). Once port forwarding is configured, you may access a Web-i device globally (no static IP address required).
Smart Phone Control
Once the Web-i web page appears on your smart phone, bookmark the page so you can access your relays just like an App on your home screen of your smart phone. Using this method, you can be anywhere in the world and still monitor and control relays as long as your mobile device has an internet connection. It even works using 3G and 4G internet services, so you can be in your car and stay in control of your relays.
Wi-Fi Adapter Available
Make these Web-i controllers Wi-Fi compatible by simply connecting the Netgear WNCE2001 Universal Wireless Internet Adapter. The WNCE2001 will connect any of these Web Relay devices to an existing 802.11 wireless network. Installation couldn't be easier with Netgear's CD-less, wireless installation. The Netgear WNCE2001 can be purchased on your own or select the Wi-Fi option at checkout to add to your order.
Perhaps the most overlooked aspect of relay control is proper handling of inductive loads. Inductive loads can best be defined as anything with a magnetic coil, such as a motor, solenoid, or a transformer. Controlling a inductive load using this relay controller requires the use of induction suppression capacitors. The purpose of this capacitor is to absorb the high voltages generated by inductive loads, blocking them from the contacts of the relay. Without this capacitor, the lifespan of the relay will be greatly reduced. Induction can be so severe that it electrically interferes with the microprocessor logic of our controllers, causing relay banks to shut themselves down unexpectedly. In the case of Ethernet devices, customers may experience loss of communications until the device is reconnected. Capacitors that we offer are available at checkout, for more information view our Induction Suppression Video.