The Simplicity of MirC, The Power of .NET with Wi-Fi

Inputs on Sender Controller Control the Relays on Receiver Controller
Controllers  Communicate over a LAN or Internet via Internet Connection
Controllers Will Find Each Other No Matter Where They Are in the World

Control a Switch From Anywhere in the World

The sending device is equipped with contact closure inputs and will find and control the relays on the remote device, no matter where they are plugged in, anywhere in the world automatically once power and an internet connection are provided. You can also use these devices across a LAN and the devices will automatically know they are on the same network so they will use network communications instead of internet protocols.

MCNET Boards allow contact closure inputs to control contact closure outputs in a remote location using Ethernet communications. The sending device is equipped with contact closure inputs, used to control relays on the remote device. Both sender and relay controller are included when you purchase a MirC pair.

Learn more about how MCNET works

Easy Security Configuration

NCD Wi-Fi relay controllers offer a powerful and easy to use wireless solution for relay control. As many of our customers already know, working with Wi-Fi devices can be challenging because they must be associated to a wireless network, and must be configured with security protocols. By combining a Netgear WNCE2001 Ethernet to Wi-Fi adapter to our standard Ethernet controllers, we can circumvent all of the problems with working with Wi-Fi at a more reasonable price than working with any available embedded Wi-Fi solution.

WiFi Network Adapter

Inputs of the Netgear WNCE2001 Wireless AdapterWhen you purchase this Wi-Fi MirC Pair we have bundled two Netgear WNCE2001 Ethernet to Wi-Fi adapters with the Ethernet MirC Controllers for your convenience. The Netgear WNCE2001 Wi-Fi Adapter allows you to take these Ethernet enabled boards and use it wirelessly to connect to a network. The Netgear WNCE2001 is perfectly suited for use with Ethernet devices offering 100% compatibility and easy setup. Configure the WNCE2001 to your wireless network then simply plug it into the Ethernet port of these devices. We have tested a couple of different Wi-Fi to Ethernet solutions and the Netgear Universal Wireless Internet Adapter really is the best solution for ease of setup and compatibility with these controllers. If you would like to purchase your own Wi-Fi adapters simply purchase one of our MCNET controllers that are Ethernet only and do not ship with the Netgear Wi-Fi adapter.

Simply configure the Netgear WNCE2001 Wi-Fi Adapter to your existing network and then connect it to your Ethernet device.  It's that simple and we'll show you how in the above video.


Learn about the Netgear WNCE2001 Universal Wireless Adapter

MXNET Server

MXNET Boards can do this by using a remote server that records and updates the IP Address of the pair and forwards the data from one to another. By default MXNET Boards use as the server but, you can install our software on your own server and use it instead (this will require the server to have a static IP Address).

The Possibilities

The possibilities are endless with the MCNET series. They can be as simple or as complex as you want to make them. You can use a simple Push Button to activate the Relays or use a Current Sensor to constantly monitor the voltage running to a machine.

Remote Building Lights

You want to control the lights at a remote building from your house with a Push Button. Simply wire the lights to the board at the remote building and wire a Push Button to the necessary inputs on the board at your house and connect power and Internet to both. It's as simple as that.

Now replace the lights with any electronic device you need to control remotely and you have complete remote control from anywhere in the world.