XSC Wireless ProXR Relay Enhanced with UXP:

ZigBee Relay Controller with
UXP Expansion Port and XR Expansion Port

Long Range Wireless Control is Effortless!

This relay controller was developed for users with low-current, low-signal switching applications such as telecommunications, networking, video, line-level audio, and much more.

It works like this.  Plug our XSC modem of your choice into the USB Port of your computer.  The modem will mount as a COM port on your PC.  Open the COM port and start sending data to the modem.  The modem will forward your data to all XSC compliant devices within range (it is also possible to speak to a specific device when other controllers are in range).

This device uses DPDT relays. A single DPDT relay is made up of 2 SPDT switches. So each relay acts as two switches that are activated at the same time. This allows two independent signals to be switched at one time. In effect, there are two independent switches on a single DPDT relay.

This series of relay controllers are among the smallest, most versatile Long Range Wireless Relay Controllers we offer.  In fact, we believe this series to be the smallest long range relay controller on the market with the highest current switching capabilities.

Even a no-frills design deserves a high-quality driver stage, and that's exactly what we put on this Relay controller.  Fast-reacting flyback diodes help shunt dangerous voltages away from the driver circuit.

The 5 Amp SPDT relays use hermetically sealed NIAS relays. The 5 Amp SPDT relays use hermetically sealed OMRON relays. XSC Long Range Antenna

Long Range Antenna

An outside antenna will need to be installed in order to reach the 15 mile limit of these devices.  When you choose this optional antenna we will include everything you will need to install this except for the pole. Included will be the Cushcraft PC9013 antenna, 20 feet of cable (longer cables are not recommended) and the connector to connect the board to the cable.  Purchase a pole to mount the antenna from your local home improvement store and install the antenna.  Connect the board to the antenna via the provided cable and start sending commands.