National Control Devices Preprogrammed Microcontroller Products

Preprogrammed Microcontrollers:

Build an RS-232 Controlled

Graphic Display Controller

Using our New Line of

Firmware!!!

28-Pin DIP (.3" Skinny) or SOIC Versions Available

8K Upgradable FLASH Processor

ALL FIRMWARE INCLUDES CERAMIC RESONATOR

*Stock #*	*Description*	Command Set	*Order*	*1-25*	26-99
GDCN-GU128x32	RS-232 Display Controller Chip for Noritake GU128x32 VF Display	*Noritake800.PDF*		*$34*	*$29*
GDCN-GU128x64	RS-232 Display Controller Chip for Noritake GU128x64 VF Display	*Noritake800.PDF*		*$34*	*$29*
GDCN-GU160x16	RS-232 Display Controller Chip for Noritake GU160x16 VF Display	*Noritake800.PDF*		*$34*	*$29*
GDCN-GU160x32	RS-232 Display Controller Chip for Noritake GU160x32 VF Display	*Noritake800.PDF*		*$34*	*$29*
GDCN-GU192x16	RS-232 Display Controller Chip for Noritake GU192x16 VF Display	*Noritake800.PDF*		*$34*	*$29*
GDCN-GU256x32	RS-232 Display Controller Chip for Noritake GU256x32 VF Display	*Noritake800.PDF*		*$34*	*$29*
GDCO-DMF50426	RS-232 Display Controller Chip for Optrex DMF50426 128x32 Display	*DMF50426-7.PDF*		*$34*	*$29*
GDCO-DMF50427	RS-232 Display Controller Chip for Optrex DMF50427 128x32 Display	*DMF50426-7.PDF*		*$34*	*$29*
GDCO-DMF5005	RS-232 Display Controller Chip for Optrex DMF5005 240x64 Display	*DMF5005-10.PDF*		*$34*	*$29*
GDCO-DMF5010	RS-232 Display Controller Chip for Optrex DMF5010 240x64 Display	*DMF5005-10.PDF*		*$34*	*$29*
GDCO-DMF5001	RS-232 Display Controller Chip for Optrex DMF5001 160x128 Display	*DMF5001-3.PDF*		*$34*	*$29*
GDCO-DMF5003	RS-232 Display Controller Chip for Optrex DMF5003 160x128 Display	*DMF5001-3.PDF*		*$34*	*$29*
GDCO-DMF50773	RS-232 Display Controller Chip for Optrex DMF50773 240x128 Display	*DMF50773.PDF*		*$34*	*$29*
*SUPPORT*	*COMPONENTS*	For use with our line of Display Controller Chips. See Graphic Design Controller Guide Below.
LT1054	Negative Bias Inverter for LCD Displays, REQUIRED for ANY LCD 160x128 and Larger.	*Graphic Display Controller Design Guide*		$6	Digi-Key
MAX202	RS-232 Transceiver Chip, REQUIRED for use with above chips.	*Graphic Display Controller Design Guide*		$3	Digi-Key
EE256	32K EEPROM, 1 REQUIRED, 2 RECOMMENDED for use with above chips (4 suggested for best results).	*Graphic Display Controller Design Guide*		$5	Digi-Key
IRFZ34N	N-Channel Hexfet. Required if you want to add software-controlled LED or CCFL backlight.	*Graphic Display Controller Design Guide*		$2	Digi-Key
7805	Voltage Regulator, Required for 160x128 and Larger LCD Displays.	*Graphic Display Controller Design Guide*		$1	Digi-Key
INV12	CCFL Inverter with 12 Volt Input used to Power Backlight of CCFL displays.	*Graphic Display Controller Design Guide*		*$15*	*$13*
INV5	CCFL Inverter with 5 Volt Input used to Power Backlight of CCFL displays.	*Graphic Display Controller Design Guide*		*$15*	*$13*
*VF Displays*	*(no controller, just the display)*			*1-9*	*10-25*
GU160x16-800-DO	160x16 Graphic VF Display (see picture)	*Mechanical Drawing*		*$143*	*$129*
GU192x16-800-DO	192x16 Graphic VF Display (see picture)	*Mechanical Drawing*		*$152*	*$137*
GU128x32-800-DO	128x32 Graphic VF Display (see picture)	*Mechanical Drawing*		*$135*	*$121*
GU160x32-800-DO	160x32 Graphic VF Display (see picture)	*Mechanical Drawing*		*$148*	*$133*
GU256x32-800-DO	256x32 Graphic VF Display (see picture)	*Mechanical Drawing*		*$163*	*$147*
GU128x64-800-DO	128x64 Graphic VF Display (see picture)	*Mechanical Drawing*		*$167*	*$140*
GU256x64-372-DO	256x64 Graphic VF Display (see picture)	*Mechanical Drawing*		*$289*	*$259*
LCD Displays	*(no controller, just the display)*			*1-9*	*10-25*
DMF50426NYJ-SLY-DO	128x32 LED Backlit LCD Display (see picture)	*Mechanical Drawing*		$74	$64
DMF50427NYJ-SLY-DO	128x64 LED Backlit LCD Display (see picture)	*Mechanical Data*		$73	$63
DMF5005N-DO	240x64 Reflective LCD Display (see picture)	*Mechanical Drawing*		$110	$95
DMF5005NY-LY-DO	240x64 LED Backlit LCD Display (see picture)	*Mechanical Drawing*		$119	$103
DMF5010NB-FW-DO	240x64 Blue CCFL Backlit LCD Display (see picture)	*Mechanical Drawing*		$152	$131
DMF5010NF-FW-DO	240x64 Black CCFL Backlit LCD Display (see picture)	*Mechanical Drawing*		$154	$133
DMF5001NY-LY-DO	160x128 LED Backlit LCD Display (see picture)	*Mechanical Drawing*		$152	$132
DMF5003NB-FW-DO	160x128 Blue CCFL Backlit LCD Display (see picture)	*Mechanical Drawing*		$159	$138
DMF5003NF-FW-DO	160x128 Black CCFL Backlit LCD Display (see picture)	*Mechanical Drawing*		$162	$140
DMF50773NF-SLY-DO	240x128 LED Backlit LCD Display (see picture)	*Mechanical Drawing*		$198	$172
DMF50773NB-FW-DO	240x128 Blue CCFL Backlit LCD Display (see picture)	*Mechanical Drawing*		$183	$158
DMF50773NF-FW-DO	240x128 Black CCFL Backlit LCD Display (see picture)	*Mechanical Drawing*		*$183*	*$158*

Introducing our new line of Graphic Display Controller Chips. These microprocessors were custom designed to simplify the design and integration of graphic LCD and Vacuum Florescent displays into ANY embedded system.

Other Important Resources

Required Windows Setup Software for Storing

Images, Icons, and User Parameters

Schematics for Designing LCD Circuits

Basic Stamp II SX Source Code

First Generation NCD Series

*Stock #*	*Description*	*Order*	*1-25*	26-99
NCD101	Serial-to-Parallel Converter, Networkable		*$10*	*$8.50*
NCD102	Polled Parallel-to-Serial Encoder		*$10*	*$8.50*
NCD103	ASCII Keypad Encoder		*$10*	*$8.50*
NCD104	Programmable Delay Timer		*$10*	*$8.50*
NCD105	Programmable Pulse Stretcher		*$15*	*$13.50*
NCD106	Dual 8-Bit A/D with 3 TTL Inputs, and 4 TTL Outputs		*$15*	*$13.50*
NCD107	ASCII Keypad Encoder with Infrared Output		*$15*	*$13.50*
NCD108	BCD Programmable Pulse Stretcher		*$10*	*$8.50*
NCD109	Serial-to-Parallel Converter with Strobes, Networkable		*$10*	*$8.50*
NCD110	Addressable 4-Bit Serial-to-Parallel Converter		*$10*	*$8.50*

The First Generation NCD Series Preprogrammed Microcontrollers were our first line of microcontroller-based products originally released under the SMI name in 1994. We have included the original data sheets in this archive, note that contact information is NOT CURRENT on the original data sheets. Please download our microprocessor data sheets for a complete description of each component.

Byte Bugs

*Stock #*	Name	*Description*	*Order*		*1-9*	10-25
*NCD201*	*Anabug*	4-Channel A/D Converter + 1 TTL Input w/2400 Baud 7-Byte Packet Output		--	DIS	DIS
*NCD202*	*Anabug2*	2-Channel A/D Converter + 1 TTL Input w/9600 Baud 5-Byte Packet Output		--	*$10*	*$5.90*
*NCD203*	*Anabug3*	2-Channel A/D Converter w/Chip Enable & 9600 Bps 4-Byte Packet Output		--	*$10*	*$5.90*
*NCD204*	*Anabug4*	2-Channel A/D Converter, Polled 2-Way RS-232 w/9600 Baud Output		*Yes*	*$10*	*$9.00*
*NCD205*	*AnabugXT*	4-Channel A/D + 8 Bit Input, 9600/19.2K Baud 7-Byte Packet Output		--	*$14*	*$9.90*
*NCD206*	*AnabugHS*	4-Channel A/D + 8 Bit Input, 38.4K/40K Baud 7-Byte Packet Output		--	*$15*	*$10.90*
*NCD207*	*Bitabug*	5-Bit Serial-to-Parallel Converter w/2400 Baud Input		--	DIS	DIS
*NCD208*	*Bitabug2*	3-Bit Serial-to-Parallel Converter w/9600 Baud Input		--	*$10*	*$5.90*
*NCD209*	*Scam*	Networkable Dual Servo Driver for Remote Camera Positioning Applications		*Yes*	*$10*	*$9.00*
*NCD210*	*Scam2*	Networkable 3-Servo Driver for Remote Camera Positioning Applications		*Yes*	*$10*	*$9.00*
*NCD219*	*JoyScam*	Controls the SCAM chip from a Joystick or Potentiometers		*Yes*	*$10*	*$5.90*
*NCD220*	*BitaBug3*	E3C Compliant 3-Bit Output, 7 Control Commands + E3C Command Set		*Yes*	*$10*	*$9.00*

Byte Bugs are Microprocessors that are designed for simple computer control applications. They typically communicate at 9600 baud (though high-speed versions may be available) and only require a couple of external components. E3C Devices allow 256 chips or NCD devices to share a single serial port. You must provide a device number (0-255) when ordering an E3C compliant microprocessor. Please download our microprocessor data sheets for a complete description of each component.

Analog Control Processors

*Part*	*Description*	Order	*1-9*	10-25	26-99
*NCD301*	NEW!!! 10x2 LED Stereo VU Level Meter Driver with Dot, Bar, and Peek Hold/Fall Functions		$16	$13	$10
*NCD302*	NEW!!! 20 LED Single Channel VU Level Meter Driver with Dot, Bar, and Peak Hold/Fall Functions		$16	$13	$10

Analog Control Processors are devices that allow stand-alone circuit operation without the need for an external computer or microcontroller. ACPs are programmed with various functions such as VU level meter, light dimmers, and dark/light activated switches. ACPs are programmed to substitute complex analog circuit control functions.

Pricing in Higher Quantities than Listed Above are Subject to Market Fluctuations.

Please Contact Us for a Quote.

National Control Devices

Call: (417) 646-5644

www.controlanything.com

Who's Controlling Your World?

www.controleverything.com