Contact Closure Over IP
The MirXR220_MXNET Contact Closure Over IP are a set of two boards, each board has two relays and two contact closure (no voltage) inputs.
The inputs control the relays on the opposite board - it's just that simple! When the
contact closure circuit is closed the relay will remain energized, when the circuit opens the relay will turn off!
The boards can communicate within the network between buildings or where wireless can't reach. The MirXR220_MXNET has the
New 3rd Gerneration Ethernet interface installed that plugs into a router using a standard CAT5 cable. Basically the way it works is the
user configures a Static IP address into one of the board's module and then configures the other board to connect to the first.