International 12 Volt 1.5 Amp Regulated Power Supply

International Power Supply at a Glance

• Regulated Power Supply
• 90 - 264VAC to 12VDC 1.5A 50/60Hz
• Plugs Into the Barrel Connector on the Board
• 2.1mm I.D. x 5.5mm O.D. x 9.5mm R/A Barrel Connector
• 5 international Blades Included
    - North America
    - Europe
    - UK
    - Australia
    - China
  
• Up To 18 W Continuous Power
• DoE Level VI, CoC Tier 2 efficiency
• No Load Power Consumption < 0.075 W
• Universal Input Voltage Range
• Interchangeable AC Blades for Global Use
• Over Voltage, Over Current, and Short Circuit Protections
• UL/cUL, RCM, CCC, and PSE Safety Approvals
• RoHS Compliant

PWR12_INT International Power Supply

Applying Good clean power to the board in essential for the operation of the board.  Not only for the switching of the relays but the firmware that processes the commands.  Without good steady clean power from a regulated power supply the board simply will not function correctly.  More that one troubleshooting question has turned out to be from someone who says they are using a power supply that they had "just laying around" and it was not sufficient enough to provide the power needed to operate the board. 

Clean Power is Essential

Applying Good clean power to the board in essential for the operation of the board.  Not only for the switching of the relays but the firmware that processes the commands.  Without good steady clean power from a regulated power supply the board simply will not function correctly.  More that one troubleshooting question has turned out to be from someone who says they are using a power supply that they had "just laying around" and it was not sufficient enough to provide the power needed to operate the board.  We also carry an international power supply with interchangeable adapters for international customers.

Power Requirements

All boards on the site require 12 VDC power.  For our international customers there is an international power supply available and it's a 90 - 264VAC to 12VDC 1.5A 50/60Hz power supply with five adapters.  The output connector is a 2.1mm I.D. x 5.5mm O.D. x 9.5mm Female R/A barrel connector.

RoHS Compliant

This power supply is led free and RoHS Compliant.  If your requirements are for RoHS compliant parts this power supply is manufactured with RoHS compliant led free parts and solder.

Data Sheets & Quick Start Guides

Below is the Data Sheet for this power supply.