The ZADSR325ProXR_XSC 900MHz Relay will allow you to wirelessly control the relays using a 900 MHz frequency band. The board uses a
modem connected to the USB port of your computer to wirelessly communicate to the board. The modem mounts as a COM port on your PC, send
your commands to the COM port and the modem wirelessly sends the command to the board. That's all there is to it!!!
The ProXR Command Set
The ZADSR325ProXR_XSC operates by sending commands to the board to control the relays which allows you to program in
almost any language. The ProXR Command Set is the industry leading command set for controlling the relay and
reading the inputs on the board.
XBP24-AUI-EXT_ZIGMO modem is required and plugs into the USB port on your PC and will mount as a COM port. Next, send commands to
the COM port and the modem will forward the commands wirelessly to the board!. That's all there is to it!!! It is possible to
communicate to many 900 MHz devices within range. This modem is Powered by the USB Port and includes USB Cable and Enclosure.