800-960-4287
sales@relaypros.com
P.O. Box 63 Osceola, MO 64776

ProXR RS232 DPDT Relay Controller

Serial Relay Board 32-Channel 5-Amp DPDT with UXP Port

Product Code: ZUXPSR325DPDTPROXR_ZRS

Data Collection and Control with Future Expandability in Mind. This ProXR Series Controller is Feature Rich and Ready to Grow with your Needs!

Serial Relay Board 32-Channel 5-Amp DPDT with UXP Port

$1,062.00/ea

The latest version of the ProXR Series have interchangeable communications modules that can be swapped at will. Simply disconnect all power from the board and pull off one module and replace it with another.

Resources:

Mechanical Drawing

This Product:

ZUXPSR325DPDTPROXR_ZRS

Ratings	AC	DC
Voltage	240	24
Amperage

	Serial Relay Board 32-Channel 5-Amp DPDT with UXP Port
Stock#: ZUXPSR325DPDTPROXR_ZRS	$1,062.00

Mechanical Drawing

Mechanical Drawing for this board

Serial Relay Board 32-Channel 5-Amp DPDT with UXP Port

Code: ZUXPSR325DPDTPROXR_ZRS

$1,062.00

Product Details

Serial Relay Board

The ZUXPSR325DPDTProXR_ZRS Serial Relay Board is equipped with firmware built into the board that will allow you to send commands to the board to energize the relay. The RS232 interface will allow you to connect the board to the DB9 port on your computer. The board will mount to any existing COM port.

ZUXPSR325DPDTProXR_ZRS The Ideal Choice

The ZUXPSR325DPDTProXR_ZRS Serial Relay Board allows you to program in almost any language and has the ProXR Command Set, the industry leading command set for sending commands to control relays and read the inputs on the board.

Connect to Other Devices

The ZUXPSR325DPDTProXR_ZRS_ZRS Serial Relay Board Connects to any devices through a DB9 or Direct Wire Connection that has the ability to send numerical commands. Add relay control to Crestron, AMX or any system that has a DB9 interface.

Attributes in <span class="bold">bold</span> are required.

Choose Your Serial Connection Type^ZRS-A connection is for hard wiring directly to the board, ZRS-B has the full DB-9 connector, ZRS-AB has the DB-9 connector but is is located off the board when the connector needs to reach to the side of the enclosure. Pictures of each can be found under the RS-232 Interface tab below:

Add a Power Supply?^Reliable Power Means Reliable Switching! The PWR12 is regulated power supply providing clean power necessary for the performance of this board. Choose US or International version:

Add a Serial Cable?^This is a 6' DB-9 Male to DB-9 Female cable:

Add Induction Suppression Capacitors?^The purpose of these capacitors is to absorb the high voltages generated by inductive loads, blocking them from the contacts of the relay, use when switching a motor or fluorescent lights:

Add More Relays?^Adding more relays is easy! These expansion boards connect using an included 6 inch ribbon cable. Expansion boards can be added until you reach 256 total relays.:

Add a UXP Expansion Board?:

Add Software to Control This Board?^N-Button Pro Software creates up to 256 widgets or buttons to control relays using a point-and-click interface:

Shopping Cart

Your cart is currently empty.

ProXR RS232 DPDT Relay Controller