Web Relay

Web Relay at a Glance...

  • 16 Relay Installed on a Circuit Board
      - Highly reliable under almost any conditions
  • Onboard Ethernet Interface
      - Plugs directly into Router
  • Built-In Working Web Pages
      - Page for Turning Relays On/Off
      - Page with Meters for Reading Sensors
      - Page for Creating Macros
      - Page for Configuration & Setting Passwords
  • ProXR Versions
      - Industry Leading Command Set
      - Expandable to 256 Relays

Selecting the Proper Amperage

For more information on selecting a board with the correct relay amperage for your application see Choosing a Proper Amperage.

Selecting The Web Interface

By selecting the Web Relay interface you will be accessing web pages that are built into the module to control the relays.  Boards on this page are equipped with a Web-i communications module that adds Ethernet communications to the board with built-in web pages.  The board will plug directly into your router where it is assigned an IP address or you can set a static IP.  Once the IP address has been assigned you can access the web pages using any browser!

Selecting a Web Relay Series

Web RelayThe 16-Channel boards are available in the ProXR versions.  The boards have firmware installed and accept the ProXR command set, the industry leading command set for controlling relays.  All ProXR controllers are expandable to 256 relays. 

Selecting a Web Relay Board

What amperage relay do you need?  Below you will find the 16-channel Web Relay boards available.  The difference being the amperage of the relays installed.  Choose the controller that fits the amperage you are switching.  You will find SPDT relays in the 5, 10 and 20 amp versions and an SPST version in the 30 amp version.  DPDT versions are also available with 1, 3 or 5 amp relays installed.  For more information on selecting the correct relay for your application see Choosing a Proper Amperage.