
Ethernet Relay at a Glance...
- 1 Relay Installed on a Circuit Board
- Gen3 Ethernet - New for 2020
- Supports DHCP & Fixed IP Address
- Web Interface for Configuration Settings
- Programmable TCP Port and IP Address
- Windows App for Configuration and Recovery - Working Web Pages - New for 2020
- Pages Already Created
- Basic Control Functions
- Use with Any Browser - Industry Leading Command Set
- Send Specific Commands to Trigger Relays
- Trigger Any or All Relays
- Grouping, Flashing and Timers Available
- Program in Almost any Language
Selecting the Proper Amperage
For more information on selecting a board with the correct relay amperage for your application see Choosing a Proper Amperage.
Ethernet Relay
To control the Ethernet Relay you will be sending commands through your local area network or internet to the board. The New 3rd Gerneration Ethernet interface installed plugs intro a router using a standard CAT5 cable where it is assigned an IP address. Once on the network, commands can be sent to control the relay from within the network or from outside over the internet. This device also supports Static IP Addresses, DHCP, and has the ability to recover back to factory default settings with a simple press of a button!Gen3 Web Relay

Selecting an Ethernet Relay Series
