WiFi Relay Controller Board

WiFi Relay Controller Board at a Glance...

  • 32 Relays Installed on a Circuit Board
      - Highly Reliable Under Almost Any Conditions
  • Embedded WiFi over 802.11b/g
      - Supports Direct TCP/IP Communications
      - Supports DHCP and Fixed IP Address
      - Password Protection
  • WiFi Configuration Kit Available
      - Choose Network & Set Password
  • ProXR Versions
      - Industry Leading Command Set
      - Expandable to 256 Relays

Selecting the Proper Amperage

For more information on selecting a board with the correct relay amperage for your application see Choosing a Proper Amperage.

Selecting The WiFi Interface

The WiFi Relay Controller Board will allow you to control relays over a WiFi network or internet.  Boards on this page are equipped with a WiFi communications module and have thirty two relays installed on the board.  The WiFi interface will allow you to associate the board with your existing Wi-Fi network and send the commands over a Wi-Fi network.  The Wi-Fi interface supports DHCP, Static IP, Direct TCP/IP Communications and with a properly configured network internet based communications.

Selecting a WiFi Relay Series

wifi relay controller boardThe 32-Channel boards are available in the ProXR version.  The boards have firmware installed and accept the ProXR command set, the industry leading command set for controlling relays.  All ProXR controllers are expandable to 256 relays.  When you find your controller click on the Full Description link to view full specs, watch setup videos, download software and purchase.

Selecting a WiFi Relay Controller Board

What amperage relay do you need?  Below you will find the 16-channel WiFi Relay Controller Boards that are available.  The difference being the amperage of the relays installed.  Choose the board that fits the amperage you are switching.  You will find SPDT relays in the 5, 10 and 20 amp versions and an SPST version in 30 amp.  DPDT versions are also available with 1, 3 or 5 amp relays installed.  For more information on selecting the correct relay for your application see Choosing a Proper Amperage.