 
WiFi Controlled Relay at a Glance...
- 8 Relays Installed on a Circuit Board
 - ProXR Lite Not Expandable
 - ProXR Expandable to 256 Relays
- Next Generation WiFi
 - 2.4GHz WiFi Communications IEEE 802.11 b/g/nr
 - TCP, HTTP, Bluetooth, USB, UDP, MQTT
 - Security: WPA/WPA2/WPA2-Enterprise and WPS
 - Supports DHCP or Static IP
- Working Web Pages
 - Basic On/Off Function
 - Use with Any Browser
- Industry Leading ProXR Command Set
 - Program in Almost any Language
 - Send Specific Commands to Control Relays
 - Control Any or All Relays
 - Toggle, Flash and Timing Commands
- ProXR AD8 Command Set
 - Read 0 to 5 Volt Sensors
 - Monitor External Sensors or Contact Closure
 - Relay Activator, Inputs Directly Control Relays
Selecting the Proper Amperage
For more information on selecting a board with the correct relay amperage for your application see Choosing a Proper Amperage.
NextGen WiFi Relay Interface
The NexGen WiFi is NCD's second generation WiFi communications module that modernizes connectivity by combining WiFi, Bluetooth, USB, and MQTT Communications into a single module! The NexGen WiFi module includes firmware that focuses on the most needed features while retaining the flexibility to adapt to just about any application. Using the integrated web page in Soft AP mode, users have the ability to configure the NexGen WiFi module by enabling and disabling features as needed.NextGen Web Relay
 The NextGen Module has the added capability to configure the module for use with a browser!  The New NextGen WiFi module has the ability to select a web page that can be used to control the relays!  The web page is already created and can be selected when setting up the module.  There are pages created for the specific number of relays installed on the board, simply select the number of relays installed on the board.
The NextGen Module has the added capability to configure the module for use with a browser!  The New NextGen WiFi module has the ability to select a web page that can be used to control the relays!  The web page is already created and can be selected when setting up the module.  There are pages created for the specific number of relays installed on the board, simply select the number of relays installed on the board.  Selecting a WiFi Relay Series
 The 8-Channel boards are available in the ProXR Lite and ProXR versions.  Both versions have the same firmware installed and accept the same ProXR command set, the industry leading command set for controlling relays.  The ProXR lite version is non-expandable, the ProXR version is expandable to 256 relays.
The 8-Channel boards are available in the ProXR Lite and ProXR versions.  Both versions have the same firmware installed and accept the same ProXR command set, the industry leading command set for controlling relays.  The ProXR lite version is non-expandable, the ProXR version is expandable to 256 relays.   
 
 
 
 
 
 
 
 
 
 
