Wireless Mir-C Relay
Configurable Delay Relay
All The Features You Need...
- Sold in Pairs
- Sender Device Controls Receiver Device
- Contact Closure Inputs on Sender
- Relay Outputs on Receiver
- 802.15.4 Wireless Operation up to 15 Miles
- 300' Standard Range
- 1 Mile w/External Antenna option
- 2 Mile w/External Antenna option
- 15 Mile w/External Antenna option
- Line of Sight Operation
- No Computer, No Programming, No Set-Up
- Works Together Right Out of the Box!Wireless Mir-C Relays
Unique Contact Closure Switching
Mir-C Relays are equipped with firmware built into the board that will allow you to connect contact closure inputs to control contact closure outputs in a remote location. The sending device is equipped with contact closure inputs, used to control relays on the remote device. The sender and Receiver controllers are a permanently married pair and are both included when you purchase a Mir-C.
No Set-up, No Configuration...
Works Right Out of the Box!
Other Time Relay Options:
Mir-C Contact Closure Relay
Contact Closure Inputs on Sender Device
Relay Outputs on Receiver Device
Fast, Reliable Wireless Communication
Two Boards Working TogetherMir-C controllers are really two boards that allow contact closure inputs on the first board to control relay outputs on a second board. The sending device is equipped with contact closure inputs, the receiving devise is where the relays are. Both sender and relay devices are included when you purchase a Mir-C pair. Contact closures are read on one controller, data is sent to other controller to turn on or off relays, remote device replies back, busy light flashes to confirm data was received at the other end.
Wireless RangeMirC controllers use different wireless communication technologies giving them ranges of 300 Feet (Short Range), 1-Mile, 2-Mile and up to 15 Miles (Long Range). The wireless protocol will be an 802.15.4 that's FAST, easy to use, and surprisingly reliable. The 300 foot module will be the default module and the prices shown on the web site will reflect this module. The other modules will be available at checkout if you would like to upgrade to a longer range. These ranges are based on a clear line of sight between MirC controllers/antennas, meaning obstacles such as trees, buildings and walls may limit these ranges slightly.
Relay StatusMir-C devices feature SPDT & SPST relays and are available with the same number of contact closure inputs on the sender as there are relays installed on the remote device. Contact Closure Inputs may only be connected to switches, buttons, or sensors with Contact Closure capability. Not suitable for use in voltage detection applications.
Who's Qualified to Use the Mir-C Series?Anyone. The Mir-C Series Controllers are the most consumer friendly devices at Relay Pros. Weather you are an electronics engineer or home hobbyist, anyone is qualified to use the Mir-C Series controller
Easy Board Selection
Find the board you need by using the interactive menu to he right. Hover over the Button and select the communication protocol and then the number of inputs/relays you would like installed.
Relay StatusThe sending device is also equipped with LEDs that display the status of the remote relay. Status information is verified using 2-way communications. If communication is lost between the remote relay and the sending device, the sending device will turn off the LED. Additionally, every MirC controller is equipped with a Busy/Ready LED. If the Busy LED flashes, this indicates the remote device has successfully received and accepted your contact closure status. If the Busy LED does not flash, the remote device is out of range.
Communication Between BoardsMir-C devices use 802.15.4, wired and Ethernet two-way communications to ensure the remote device is properly functioning. The Busy LED is always used to indicate a properly functioning remote device. If you do not see the Busy LED flash, then the Mir-C controller is unable to communicate to the remote device. A flashing busy LED is your verification that all communications are functioning properly between Mir-C controllers.
Multiple Mir-C Pairs?Multiple Mir-C Controllers can be used in one locations. One Pair of Mir-C controllers will not interfere with another Mir-C pair as they are isolated through the way they are designed. Mir-C Devices are paired together before shipment and will only communicate to each other, for this reason they will not interfere with other Mir-C controllers.
Contact Closure InputsA Mir-C Sender controller has as many inputs as its mating Mir-C Receiver has Relays. So a pair of 4 relay Mir-C controllers will have 4 relays on the Receiver board and 4 inputs on the Sender board which are used for controlling the relays on the Receiver Board, the same holds true for 1, 2, and 8 relay versions. Users must NEVER apply any voltage to an input on the Mir-C Sender controller, these inputs are for Contact Closure connection only.
Relay OutputsMir-C Controllers have 1, 2, 4, or 8 Relays integrated into the circuit board. A relay is similar to a switch. The only difference between a switch and a relay is the actual mechanism for changing the on/off status of the switch. On a switch, you manually push on a piece of metal or plastic to operate the switch. On a relay, an electric current is used to operate the switch. Relays do NOT provide a voltage output. They provide a contact closure output, exactly like the terminals found on a light switch at your local hardware store. Wiring to a relay will be slightly different depending on the model of Mir-C controllers you choose.
Other Communication Options:MirC Series Relay Controllers Offer three other Communications Options, Including Bluetooth Wireless, wired, and Ethernet communications.
Ordering Is Easy with Relay Pros
We Accept Visa, MasterCard, American Express, Discover, Paypal through our shopping cart or simply call our office and give us your order over the phone. You can also fax us your order 24 hours a day with your payment information to 417-646-5662. Place your items into the shipping cart and select the fax option and we'll even make the fax order for you! Centrally located in the Midwest our office hours are 8:30 - 5:00 Central Time Monday through Friday. Calling after hours? Just leave a voice mail and we'll return your call or send us an email at: firstname.lastname@example.org.
Ozarks Audio Visual
Switch It With A Relay From Relay Pros
Copyright © 2020 Relay Pros, LLC. | Ecommerce Shopping Cart Software by Miva, Inc.
- P.O. Box 63 Osceola, MO 64776