USB Computer Controlled Switching USB Relay Controllers allow computer controlled switching using the USB port of your computer. An NCD USB Relay Board emulates a COM port, allowing you to speak to the relay board using any programming language that supports serial communications. COM drivers allow you to assign any COM port to the USB Relay Board. An NCD USB Relay Driver supports 8-Channels of 8-Bit / 10-Bit Analog to Digital Conversion (A/D) or UXP Expansion Port, and includes an XR Relay Expansion Port for adding additional relays to the USB Relay Controller Board.
Quick Summery of USB Communications
USB Interface mounts as a Virtual COM Port on your PC for easy programming and 100% compatibility across ALL operating systems
Plug in, open the Virtual COM Port at 115.2K baud, and start sending commands
USB Relay
Our USB Relays feature a wide range of controllers to fit just about any application!
DPDT and SPDT controllers are available with your choice of eight channel 8/10-Bit
Analog to Digital Conversion or
UXP Expansion Port on selected models and all are of course
SignalSwitch compatible. All USB models feature the
ProXR Command Set and an
XR Expansion Port. Built from the ground up with Expansion in mind, simply Chain the
XR Expansion Modules, one after another, to meet your computer controlled switching requirements. For more detailed information and to order, please click on the links below.
UXP is a new standardized data port, specifically for the purpose of speaking to various expansion modules. If the controller you are considering is equipped with a UXP port, you can take advantage of extended commands to speak to our growing line of I/O expansion modules. UXP in the part number allows you to:
